Hot Rolled Alloy Steel Plate Grade Ship Steel Plate
Firstly we suggest steel grade equivalent S355J2+N is ship steel plate ASTM A131 GR.DH36 (minimum yield strength 355 MPa, Tensile 490 to 620 Mpa, heat treatment under normalized or TMCP, charpy V-notch impacting test @ -20 ℃).Then ASTM A131 Gr.EH36 (minimum yield strength 355 MPa, Tensile 490 to 620 Mpa, heat treatment under normalized or TMCP, charpy V-notch impacting test @ -40 ℃) is also ok and even better than S355J2+N.
The same techincals as A131 GR.DH36 and EH36,ABS Grade DH36 and ABS Grade EH36 are both ok for replacing of S355J2+N.
Second we can suggest you choose alloy structural steel ASTM A572Gr50 (minimum yield strength 345 MPa, Tensile above 450 MPa).Of course adding techincals Normalized heat treatment and Charpy V-notch impacting test -20 centigrade for A572Gr50 when ordered.
Besides,DIN 17100 St52-3 N (minimum yield strength 345 MPa, Tensile above 490-630 MPa) is also one low alloy steel. GB/T1591 Q345D (minimum yield strength 345 MPa,Tensile above 470-630 MPa,D meas done Charpy V-notch impacting at minus 20 centigrade)
The table below show the mechanical properties of grade S355J2
| | Minimum yield strength Reh
MPa | Tensile strength Rm
MPa | Minimum elongation - A
Lo = 5,65 * √So (%) | Notch impact test |
| Steel grade | Nominal thickness
mm | Nominal thickness
mm | Nominal thickness
mm | Temperature | Min. absorbed energy |
| | ≤16 | >16
≤40 | >40
≤63 | >63
≤80 | >80
≤100 | >100
≤125 | >3
≤100 | >100
≤125 | >3
≤40 | >40
≤63 | >63
≤100 | >100
≤125 | °C | J |
| | | | | | | | | | | | | |
| S355J2 | 355 | 345 | 335 | 325 | 315 | 295 | 470-630 | 450-600 | 22 | 21 | 20 | 18 | -20 | 27 |
The table below show the chemical composition of grade S355J2
| | Ladle analysis |
| Steel grade | C
max.
% | | | P
max.
% | S
max.
% | | Cu
max.
% | Other
max.
% | CEV
max.
% |
| | Nominal thickness
mm | | | | | | | | Nominal thickness
mm |
| | ≤16 | >16
≤40 | >40 | | | | | | | | ≤30 | >30
≤40 | >40
≤125 |
| | | | | | | | | | | | | | |
| S355J2 | 0,20 | 0,20 | 0,22 | 1,60 | 0,55 | 0,030 | 0,030 | - | 0,55 | - | 0,45 | 0,47 | 0,47 |
S355J2 Steel Grade Equivalent Table
| USA | Germany
DIN,WNr | Japan
JIS | European old
EN | China
GB | Sweden
SS |
| | | | | | |
| A656 | St52-3N | SS490YA | Fe510D2
S355J2G4 | Q345D | 2134-01 |
Product Tags:
|
|
Hot Rolled Boiler Alloy Steel Sheet Plate Grade / Ship Steel Plate Polished Images
|
